TPS2052P
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2052 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 1.18W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2052P Overview
The LED driver's packaged as a Tube.This package is included in 8-DIP (0.300, 7.62mm).The lighting driver is mounted in the Through Hole position.A General Purpose switch type is owned by it.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.There are 2 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is N-Channel volts.The lighting driver has Status Flag features.There is a TPS2052 family of things that it belongs to.It has a total of 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.Supply voltages of 5V allow for high efficiency.It is mounted in the way of Through Hole.In total, it has 8 pins.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).In this case, the analog IC is ANALOG CIRCUIT.
TPS2052P Features
Supplied from 5V
TPS2052P Applications
There are a lot of Texas Instruments TPS2052P Power Switches ICs applications.
- Handheld Devices
- Hot Swap
- Mobile Communication Devices
- Storage (HDDs, SSDs)
- USB Power Distribution
- HDD, SSD
- USB Power Distribution
- Hard Disk Drives
- Storage Drives
- Hot Swap
