TPS2053AD
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2053 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 1.12W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
TPS2053AD Overview
The LED driver's packaged as a Tube.There is a 16-SOIC (0.154, 3.90mm Width) package that includes it.Surface Mount is the mounting type of the LED driver.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to 0°C~125°C TJ for reliable performance.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be achieved by this LED driver.As far as features are concerned, the LED driving board has Status Flag.It is a member of the TPS2053 family.In total, there are 16 terminations.The 16 pins are used for the operation of the system.It is important to note that the LED driving board has 1 functions.As long as the supply voltage is 3.3V, high efficiency can be achieved.Surface Mount is mounted in the way.16 pins are equipped with it.The Vsup value (maximum supply voltage) is set to 5.5V.For normal operation, the supply voltage (Vsup) must be kept above 2.7V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 3 channels available.
TPS2053AD Features
Supplied from 3.3V
3 channels
TPS2053AD Applications
There are a lot of Texas Instruments TPS2053AD Power Switches ICs applications.
- Hard Disk Drives
- PC Card Hot Swap
- Wireless/Networking Cards
- Telecom and Network Systems
- HDD, SSD
- Solid State Drivers
- Storage Drives
- Low Voltage I/O System Power
- Hot-Swap Systems
- Set-Top Boxes
