TPS2053BD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 898.47mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2053 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.11mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2053BD Overview
The LED driver's packaged as a Tube.Package 16-SOIC (0.154, 3.90mm Width) contains it.The lighting driver is mounted in the Surface Mount position.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.The lighting driver has a total of 3 outputs that are available for use.It uses a supply voltage of Not Required to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.The lighting driver has Status Flag features.It is part of the TPS2053 family of LED drivers.As a result, there are 16 terminations.The 16 pins are used to operate the LED driver.It contains 1 functions.Using a voltage of 3.3V allows for high efficiency.There are 16 pins in total on this board.It has 70mOhm resistance.When this case is used, the output current is set to 500mA.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 3 channels available.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.The LED driver can also be used to produce UNDERVOLTAGE LOCKOUT.The maximum supply current for the LED driver is 0.11mA when it is operating.
TPS2053BD Features
Supplied from 3.3V
Resistance of 70mOhm
3 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2053BD Applications
There are a lot of Texas Instruments TPS2053BD Power Switches ICs applications.
- Hot Swaps
- Portable Video Game Players
- Handheld Devices
- Hot-Swap Systems
- Mobile Communication Devices
- Solid State Drivers
- Wireless Headsets
- Gaming
- Notebook PC
- Various applications equipped with buttons
