TPS2053BDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 898.47mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2053 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.11mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2053BDG4 Overview
It is packaged in the form of a Tube.There is a 16-SOIC (0.154, 3.90mm Width) package that includes it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The lighting driver has a total of 3 outputs that are available for use.In order to operate, it requires a voltage supply of Not Required.It has a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.I believe it belongs to the TPS2053 family.It consists of 16 terminations in total.The 16 pins are used for the operation of the system.It contains 1 functions.The LED driver output is limited to 500mAV.As long as the supply voltage is 3.3V, high efficiency can be achieved.16 pins are connected to it in total.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.The total number of channels is 3.It has a maximum input voltage of 5.5V volts.The input voltage minimum is 2.7V volts.The LED driver can also be used to produce UNDERVOLTAGE LOCKOUT.In order to operate, it requires at most 0.11mA amps of supply current.
TPS2053BDG4 Features
Supplied from 3.3V
3 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2053BDG4 Applications
There are a lot of Texas Instruments TPS2053BDG4 Power Switches ICs applications.
- Gaming
- Set-Top Boxes
- Set-top-box
- Smart Phones, Feature Phones
- Telecom and Network Systems
- USB Protection
- Hot-Swap Systems
- PC Card Hot Swap
- USB Ports/Hubs
- USB Power Distribution
