TPS2053BDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 898.47mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2053 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.11mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2053BDR Overview
It is packaged in the manner of a Tape & Reel (TR).There is a package for it in the 16-SOIC (0.154, 3.90mm Width) package.Mounting type Surface Mount is selected for the LED driving board.It owns General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.By default, it is set to output 3.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.Currently, the LED driving board is equipped with Status Flag features.It is part of the TPS2053 family of LED drivers.It contains 16 terminations.The operation is carried out using the 16 pins.It is important to note that the LED driving board has 1 functions.From the lighting driver, there is a maximum output of 500mAV.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.There are 16 pins in total on this board.It has a resistance of 70mOhm.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 3 channels available.The maximum input voltage is 5.5V volts.The input voltage minimum is 2.7V volts.As well as producing UNDERVOLTAGE LOCKOUT, this LED driving board is capable of producing [1].The maximum supply current for the LED driver is 0.11mA when it is operating.
TPS2053BDR Features
Supplied from 3.3V
Resistance of 70mOhm
3 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2053BDR Applications
There are a lot of Texas Instruments TPS2053BDR Power Switches ICs applications.
- Portable Video Game Players
- Notebook and Tablet Computers
- HDD and SSD
- Mobile Communication Devices
- Notebook PC
- Smart Phones, Feature Phones
- PDAs
- Hard Disk Drives
- Low Voltage I/O System Power
- HDD, SSD
