TPS2053BDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2053 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.11mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2053BDRG4 Overview
It is packaged in the manner of a Tape & Reel (TR).There is a package for it in the 16-SOIC (0.154, 3.90mm Width) package.In this case, the LED driving board is mounted as Surface Mount.The switch type of this switch is General Purpose.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.As a default, the output is set to 3.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts.It has a total of Status Flag features.It comes under the family of TPS2053.A total of 16 terminations have been found in it.It is necessary to use the 16 pins in order to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.In this case, the LED driving board can produce only 500mAV as its maximum output.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.There are 16 pins in total on this board.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.The total number of channels is 3.The maximum input voltage of the LED driver is 5.5V volts.As a minimum input voltage, it requires 2.7V volts.As well as producing UNDERVOLTAGE LOCKOUT, this LED driving board is capable of producing [1].For operation, it has a maximum supply current of 0.11mA.
TPS2053BDRG4 Features
Supplied from 3.3V
3 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2053BDRG4 Applications
There are a lot of Texas Instruments TPS2053BDRG4 Power Switches ICs applications.
- Wireless/Networking Cards
- PDAs
- Set-top-box
- Smartphone and PDA
- Portable Video Game Players
- Notebook PC
- Hot-Swap Systems
- Gaming
- Storage Drives
- Solid State Drivers
