TPS2053DR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2053 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.02mA |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2053DR Overview
Tape & Reel (TR) is the way it's packaged.The 16-SOIC (0.154, 3.90mm Width) package contains it.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has a total of 3 outputs.In order to operate, it requires a voltage supply of Not Required.It has a maximum output voltage of N-Channel volts.Status Flag features are available on the lighting driver.It belongs to the family TPS2053.The termination count is 16.In order to operate, 16 pins are used.Currently, there are 1 functions associated with the lighting driver.A supply voltage of 3.3V leads to high efficiency.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 16 pins.A self-contained econtainer holding Power Management Circuits capacity contains this lighting driver.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We offer 3 channels in total.Operation requires 0.02mA supply current.
TPS2053DR Features
Supplied from 3.3V
3 channels
TPS2053DR Applications
There are a lot of Texas Instruments TPS2053DR Power Switches ICs applications.
- Telecom and Network Systems
- Notebook and Tablet Computers
- Portable/Handheld Devices
- Hot-Swap Systems
- PC Card Hot Swap
- Wireless/Networking Cards
- Notebook PC
- Wearable Devices
- Set-Top Boxes
- Solid-State Drives
