TPS2054BD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 898.47mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2054 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Number of Channels | 4 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2054BD Overview
Tube is the way it's packaged.There is a 16-SOIC (0.154, 3.90mm Width) package that includes it.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driver has a total of 4 outputs.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.Currently, the LED driving board is equipped with Status Flag features.As you can see, it comes from the TPS2054 family.The termination count is 16.The operation is carried out using the 16 pins.As far as functions are concerned, the lighting driver has 1.The lighting driver's maximum output is 500mAV.The supply voltage of 3.3V is conducive to high efficiency.There are 16 pins in total on this board.There is 70mOhm resistance on the LED driver.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.You can select from 4 channels.There is a maximum input voltage of 5.5V volts.The input voltage minimum is 2.7V volts.By using this lighting driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.
TPS2054BD Features
Supplied from 3.3V
Resistance of 70mOhm
4 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2054BD Applications
There are a lot of Texas Instruments TPS2054BD Power Switches ICs applications.
- Portable/Handheld Devices
- Portable GPS
- Portable GPS Device
- Portable Devices
- Hot Swaps
- Wireless/Networking Cards
- Low Voltage I/O System Power
- USB Ports/Hubs
- Storage (HDDs, SSDs)
- Various applications equipped with buttons
