TPS2054BDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2054 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Number of Channels | 4 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2054BDR Overview
A Tape & Reel (TR) is used to package it.It's included in the 16-SOIC (0.154, 3.90mm Width) package.The lighting driver is mounted in the Surface Mount position.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has a total of 4 outputs.A voltage of Not Required is used to power it.It produces a maximum output voltage of N-Channel volts at its maximum output.It is equipped with Status Flag features.The TPS2054 family contains this object.It contains 16 terminations.The 16 pins are used to operate the LED driver.It is important to note that the LED driving board has 1 functions.500mAV is the maximum output of the LED driver.The supply voltage can be 3.3V for high efficiency.16 pins are connected to it in total.The LED driver has 70mOhm resistance.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, there are 4 channels available.As far as input voltage goes, its maximum is 5.5V volts.It requires 2.7V volts as the minimum input voltage.Through the use of this lighting driver, we can also produce UNDERVOLTAGE LOCKOUT.
TPS2054BDR Features
Supplied from 3.3V
Resistance of 70mOhm
4 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2054BDR Applications
There are a lot of Texas Instruments TPS2054BDR Power Switches ICs applications.
- Hard Disk Drives
- PC Cards
- USB Power Distribution
- Storage (HDDs, SSDs)
- USB Protection
- Notebook PC
- Portable Video Game Players
- Portable GPS
- USB Power Distribution
- Wireless Modem Data Cards
