TPS2054D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2054 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 4 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 80mOhm |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2054D Overview
As you can see, it's packaged in the way of a Tube.Package 16-SOIC (0.154, 3.90mm Width) contains it.The lighting driver has the mounting type Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.It is possible to use 4 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Status Flag features.I believe it belongs to the TPS2054 family.There are 16 terminations in it.It is necessary to use the 16 pins in order to operate the LED driver.It consists of 4 functions.Maximum output current falls to 500mA when operation criteria are met.It is possible to obtain high efficiency with a supply voltage of 3.3V.In this case, it is mounted in the way of Surface Mount.16 pins are equipped with it.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.7V.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.You can select from 4 channels.
TPS2054D Features
Supplied from 3.3V
4 channels
TPS2054D Applications
There are a lot of Texas Instruments TPS2054D Power Switches ICs applications.
- USB Ports/Hubs
- Smart Phones, Feature Phones
- USB Power Distribution
- Solid State Drivers
- Wireless Modem Data Cards
- Wearable Devices
- HDD, SSD
- Solid-State Drives
- Portable/Handheld Devices
- USB3.1 Power Delivery
