TPS2055AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2055 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Continuous Drain Current (ID) | 250mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 100mOhm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2055AD Overview
As a result, it is packaged in the form of a Tube.It's included in the 8-SOIC (0.154, 3.90mm Width) package.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.It is recommended to set the temperature to 0°C~125°C TJ in order to ensure reliable operation.There is a default setting of 1 for output.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It is equipped with Status Flag features.It is a member of the TPS2055 family.It contains 8 terminations.The 8 pins are used to operate the LED driver.There are 1 functions of the LED driver.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.The LED driver has a total of 8 pins.The LED driver has 80mOhm resistance.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We currently have 1 channels available.The maximum input voltage is 5.5V volts.It requires 2.7V volts as the minimum input voltage.
TPS2055AD Features
Supplied from 3.3V
Resistance of 80mOhm
1 channels
TPS2055AD Applications
There are a lot of Texas Instruments TPS2055AD Power Switches ICs applications.
- Wearable Devices
- Portable/Handheld Devices
- Portable GPS
- Telecom and Network Systems
- HDD, SSD
- Set-top-box
- Handheld Devices
- Notebook PC
- Low Voltage I/O System Power
- PC Card Hot Swap
