TPS2055D
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2055 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 250mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
TPS2055D Overview
It is packaged in the manner of a Tube.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The LED driver is equipped with 1 outputs.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.It is a member of the TPS2055 family.It contains 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 250mA in order to meet the operation requirements.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.It is positioned in the direction of Surface Mount.It is equipped with a total of 8 pins.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.7V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 1 channels available.
TPS2055D Features
Supplied from 3.3V
1 channels
TPS2055D Applications
There are a lot of Texas Instruments TPS2055D Power Switches ICs applications.
- Wireless/Networking Cards
- Portable GPS Device
- USB Protection
- HDD and SSD
- Handheld Devices
- Wireless Headsets
- Set-top-box
- Portable Video Game Players
- Various applications equipped with buttons
- PC Cards
