TPS2055P
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2055 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 1.18W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 250mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Length | 9.59mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2055P Overview
Tube is the way it's packaged.The 8-DIP (0.300, 7.62mm) package includes it.In this case, the LED driving board is mounted as Through Hole.General Purpose is the type of switch owned by it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driver has a total of 1 outputs.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Status Flag.This object belongs to the TPS2055 family.A total of 8 terminations have been found in it.The 8 pins are used to operate the LED driver.The LED driver has 1 functions.High efficiency is possible when the supply voltage is set to 3.3V.This lighting driver is mounted in the way of Through Hole.The LED driver has a total of 8 pins.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).Normal operation requires a voltage above 2.7V for the supply voltage.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.
TPS2055P Features
Supplied from 3.3V
1 channels
TPS2055P Applications
There are a lot of Texas Instruments TPS2055P Power Switches ICs applications.
- Wireless Headsets
- Portable/Handheld Devices
- Wireless/Networking Cards
- Portable Devices
- Portable GPS
- Storage (HDDs, SSDs)
- Notebook PC
- Solid State Drivers
- Hot Swaps
- Set-Top Boxes
