TPS2056ADG4
| Parameters | |
|---|---|
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2056 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 250mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
TPS2056ADG4 Overview
Tube is the way it's packaged.This file is included in package 8-SOIC (0.154, 3.90mm Width).The lighting driver has the mounting type Surface Mount.General Purpose is the switch type it owns.It is recommended to set the temperature to 0°C~125°C TJ in order to ensure reliable operation.There is a default setting of 2 for output.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts on this LED driver.It is equipped with Status Flag features.As you can see, it comes from the TPS2056 family.In total, there are 8 terminations.In order to operate, 8 pins are used.As far as the lighting driver is concerned, there are 1 functions.From the lighting driver, there is a maximum output of 250mAV.With a supply voltage of 3.3V, high efficiency is possible.There are 8 pins in total on this board.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.There are a total of 2 available channels.A maximum input voltage of 5.5V volts can be applied to it.A minimum input voltage of 2.7V volts is required for this LED driver.
TPS2056ADG4 Features
Supplied from 3.3V
2 channels
TPS2056ADG4 Applications
There are a lot of Texas Instruments TPS2056ADG4 Power Switches ICs applications.
- Low Voltage I/O System Power
- USB Protection
- Hot Swaps
- Wearable Devices
- Portable Devices
- USB3.1 Power Delivery
- Portable Music Players
- Notebook PC
- Wireless Modem Data Cards
- Hot Swap
