TPS2056ADRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2056 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 250mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2056ADRG4 Overview
It is packaged in the form of a Tape & Reel (TR).There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to 0°C~125°C TJ for reliable operation.The LED driver has 2 outputs.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Status Flag features are available on the lighting driver.As you can see, it comes from the TPS2056 family.A total of 8 terminations can be found in it.The operation is performed through the 8 pins.It has 1 functions.250mAV is the maximum output of the LED driver.A supply voltage of 3.3V leads to high efficiency.8 pins are connected to it in total.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 2 channels to choose from.It has a maximum input voltage of 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.
TPS2056ADRG4 Features
Supplied from 3.3V
2 channels
TPS2056ADRG4 Applications
There are a lot of Texas Instruments TPS2056ADRG4 Power Switches ICs applications.
- Hot Swaps
- USB Power Distribution
- Wireless Headsets
- Smartphone and PDA
- Storage Drives
- Portable GPS Device
- Hard Disk Drives
- PC Cards
- USB3.1 Power Delivery
- Handheld Devices
