TPS2057AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2057 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 1.12W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Continuous Drain Current (ID) | 250mA |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 100mOhm |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2057AD Overview
It's?packaged?in?the way?of?a?Tube.It is included with the 16-SOIC (0.154, 3.90mm Width) package as well.This lighting drivere has a mounting type of Surface Mount.There is a switch type of General Purpose.In order to guarantee reliable performance, the temperature should be set to 0°C~125°C TJ.It is possible to use 3 outputs in the lighting driver.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is N-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.The TPS2057 family contains this object.It has a total of 16 terminations.For operation, we use the 16 pins.It contains 1 functions.Using a voltage of 3.3V allows for high efficiency.In this case, it is mounted in the way of Surface Mount.A total of 16 pins are included in this LED driver.Normal operation requires a voltage above 2.7V for the supply voltage.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.A total of 3 channels are available for you to choose from.
TPS2057AD Features
Supplied from 3.3V
3 channels
TPS2057AD Applications
There are a lot of Texas Instruments TPS2057AD Power Switches ICs applications.
- Portable Music Players
- Portable GPS
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- PDAs
- Portable Devices
- USB Power Distribution
- Mobile Communication Devices
- Hot Swap
- Wireless Modem Data Cards
