TPS2057D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2057 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 250mA |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 100mOhm |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2057D Overview
As you can see, it's packaged in the way of a Tube.It's included in the 16-SOIC (0.154, 3.90mm Width) package.The lighting driver is mounted in the Surface Mount position.This switch is of type General Purpose.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.In this LED driver, there are no outputs available.Operation is based on Not Required supply voltage.The maximum output voltage is N-Channel volts.Features of the lighting driver are Status Flag.As you can see, it comes from the TPS2057 family.It has a total of 16 terminations.16 pins are used for operation.There are 1 functions of the LED driver.A supply voltage of 3.3V leads to high efficiency.The lighting driver is mounted in the direction of Surface Mount.There are 16 pins in total on this board.In this case, Vsup (maximum supply voltage) is set to 5.5V.For normal operation, the supply voltage (Vsup) must be kept above 2.7V.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.We currently have 3 channels available.
TPS2057D Features
Supplied from 3.3V
3 channels
TPS2057D Applications
There are a lot of Texas Instruments TPS2057D Power Switches ICs applications.
- Low Voltage I/O System Power
- Portable/Handheld Devices
- Smartphone and PDA
- Hard Disk Drives
- Notebook PC
- USB Protection
- Wireless/Networking Cards
- Mobile Communication Devices
- HDD and SSD
- Hot Swap
