TPS2057DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2057 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 250mA |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 100mOhm |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2057DR Overview
Tape & Reel (TR) is the way it's packaged.It's included in the 16-SOIC (0.154, 3.90mm Width) package.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The lighting driver is equipped with 3 outputs that can be used.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts on this LED driver.Status Flag features are available on the lighting driver.It is part of the TPS2057 family of LED drivers.There are 16 terminations in it.For operation, 16 pins are used.It consists of 1 functions.The maximum output current must drop to 250mA to meet the operation criteria.The supply voltage can be 3.3V for high efficiency.In this case, it is mounted in the way of Surface Mount.A total of 16 pins are included in this LED driver.The maximum supply voltage for this LED driver is 5.5V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.7V.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 3 channels to choose from.
TPS2057DR Features
Supplied from 3.3V
3 channels
TPS2057DR Applications
There are a lot of Texas Instruments TPS2057DR Power Switches ICs applications.
- Portable Music Players
- Low Voltage I/O System Power
- Portable/Handheld Devices
- Wireless Modem Data Cards
- Hot-Swap Systems
- USB Ports/Hubs
- USB Power Distribution
- PC Card Hot Swap
- Wireless/Networking Cards
- Portable Devices
