TPS2060DGN
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 1.37W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2060 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Max Output Voltage | 6V |
| Switch Type | General Purpose |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | 0°C~105°C TJ |
| Packaging | Tube |
TPS2060DGN Overview
As you can see, it's packaged in the way of a Tube.Package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad contains it.The LED driver is mounted as Surface Mount.It owns General Purpose switch type.To ensure reliable operation, the temperature should be set to 0°C~105°C TJ.The lighting driver is equipped with 2 outputs that can be used.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.The TPS2060 family consists of this type.It contains 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.As far as functions are concerned, the lighting driver has 1.The maximum output current is reduced to 1.5A to meet the operation criteria.High efficiency is possible at 3.3V supply voltage.The lighting driver is mounted in the direction of Surface Mount.There are 8 pins in total on this board.The LED driver has 70mOhm resistance.In this case, the output current will be set to 1.5A.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 available channels.This LED driver can handle voltages up to 5.5V volts.As well as producing UNDERVOLTAGE LOCKOUT, this LED driving board is capable of producing [1].A maximum supply current of 0.09mA is available for operation.
TPS2060DGN Features
Supplied from 3.3V
Resistance of 70mOhm
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2060DGN Applications
There are a lot of Texas Instruments TPS2060DGN Power Switches ICs applications.
- Wireless Modem Data Cards
- Storage (HDDs, SSDs)
- PDAs
- USB Power Distribution
- Handheld Devices
- Notebook and Tablet Computers
- Hot Swaps
- USB3.1 Power Delivery
- Solid State Drivers
- Low Voltage I/O System Power
