TPS2060DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | 0°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2060 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2060DGNR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, it is included.The mounting type of the LED driver is Surface Mount.A General Purpose switch type is owned by it.Ensure reliable operation by setting the temperature to 0°C~105°C TJ.There is a default setting of 2 for output.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.There are Status Flag features available on the LED driving board.It comes under the family of TPS2060.It contains 8 terminations.In order to operate, the 8 pins are used.The LED driving board has a total of 1 functions.In terms of output, the lighting driver can provide a maximum of 1.5A V.High efficiency is possible when the supply voltage is set to 3.3V.In this case, it is mounted in the way of Surface Mount.8 pins are equipped with it.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.You can select from 2 channels.With this LED driver, UNDERVOLTAGE LOCKOUT can also be produced.It operates at a maximum supply current of 0.09mA.
TPS2060DGNR Features
Supplied from 3.3V
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2060DGNR Applications
There are a lot of Texas Instruments TPS2060DGNR Power Switches ICs applications.
- Hot Swap
- Wireless/Networking Cards
- USB3.1 Power Delivery
- Portable Music Players
- Storage (HDDs, SSDs)
- USB Power Distribution
- Portable/Handheld Devices
- Hot Swaps
- PC Cards
- Portable GPS
