TPS2061CDGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Resistance | 86mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2061 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Current | 1A |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.8 ms |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 2 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Switching | MAKE-BEFORE-BREAK |
| Rds On (Typ) | 86m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2061CDGN Overview
It's?packaged?in?the way?of?a?Tube.This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.This LED driving board is mounted using the mounting type Surface Mount.There is a USB Switch switch type associated with it.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.A lighting driver with Load Discharge, Status Flag features is available.This object belongs to the TPS2061 family.The operation is carried out using the 8 pins.The lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 86mOhm ohms.It is set to 1A in this case.In this case, the analog IC in this gadget is SPST.
TPS2061CDGN Features
Resistance of 86mOhm
TPS2061CDGN Applications
There are a lot of Texas Instruments TPS2061CDGN Power Switches ICs applications.
- Handheld Devices
- USB Power Distribution
- Solid-State Drives
- USB3.1 Power Delivery
- Low Voltage I/O System Power
- Storage (HDDs, SSDs)
- Portable Devices
- Portable Music Players
- Notebook PC
- Hot-Swap Systems
