TPS2061CDGNR
| Parameters | |
|---|---|
| Switching | MAKE-BEFORE-BREAK |
| Rds On (Typ) | 86m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| ECCN Code | EAR99 |
| Resistance | 86mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2061 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.8 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 2 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
TPS2061CDGNR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, it is included.It has been mounted as Surface Mount on the LED driver.A USB Switch switch type is owned by it.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.The LED driver is equipped with 1 outputs.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The lighting driver has Load Discharge, Status Flag features.There is a TPS2061 family of things that it belongs to.The operation is carried out using the 8 pins.The maximum output current is reduced to 1A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.There is 86mOhm resistance on the LED driver.This results in a 1A output current.There is an analog input IC in this gadget, which is SPST.In order to maximize efficiency, the supply voltage should be set at 5.5V.A maximum input voltage of 5.5V volts can be applied to it.It requires 4.5V volts as the minimum input voltage.For its operation, a maximum current requirement of 85μA is required.
TPS2061CDGNR Features
Resistance of 86mOhm
TPS2061CDGNR Applications
There are a lot of Texas Instruments TPS2061CDGNR Power Switches ICs applications.
- Solid State Drivers
- Hot Swap
- Set-Top Boxes
- USB Protection
- Wireless Modem Data Cards
- Wireless Headsets
- HDD and SSD
- Wireless/Networking Cards
- USB Power Distribution
- Storage (HDDs, SSDs)
