TPS2061DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2061 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2061DG4 Overview
The LED driver's packaged as a Tube.It is included in the package 8-SOIC (0.154, 3.90mm Width).In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type that it owns.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driver has 1 outputs.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts.The lighting driver has Status Flag features.As you can see, it comes from the TPS2061 family.As a result, there are 8 terminations.For operation, 8 pins are used.Currently, there are 1 functions associated with the lighting driver.From the lighting driver, there is a maximum output of 1AV.High efficiency is possible when the supply voltage is set to 3.3V.There are 8 pins in total on this board.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.A maximum input voltage of 5.5V volts can be applied to it.A minimum input voltage of 2.7V volts is required for this LED driver.By using this lighting driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.A maximum supply current of 0.07mA is available for operation.
TPS2061DG4 Features
Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2061DG4 Applications
There are a lot of Texas Instruments TPS2061DG4 Power Switches ICs applications.
- Wireless Modem Data Cards
- Solid-State Drives
- USB Power Distribution
- Low Voltage I/O System Power
- USB Power Distribution
- Portable GPS
- Storage Drives
- Solid State Drivers
- Wireless Headsets
- Various applications equipped with buttons
