Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
Number of Pins |
8 |
Weight |
24.408939mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
70mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
UNDERVOLTAGE LOCKOUT |
Max Power Dissipation |
1.7123W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS2061 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Supply Voltage-Min (Vsup) |
2.7V |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Output Configuration |
High Side |
Output Current |
1A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Turn On Delay Time |
3 ms |
Switch Type |
General Purpose |
Supply Current-Max (Isup) |
0.07mA |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
10 ms |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) |
70m Ω |
Height |
1.1mm |
Length |
3mm |
Width |
3mm |
Thickness |
1.02mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2061DGNR Overview
It is packaged in the manner of a Cut Tape (CT).There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package that includes it.It has been mounted as Surface Mount on the LED driver.It owns General Purpose switch type.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.The LED driver is equipped with 1 outputs.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.The TPS2061 family contains this object.The termination count is 8.For operation, 8 pins are used.It is important to note that the LED driving board has 1 functions.The supply voltage can be 3.3V for high efficiency.In this case, it is mounted in the way of Surface Mount.A total of 8 pins are included in this LED driver.There is 70mOhm resistance on the LED driver.It is set to 1A in this case.For normal operation, the supply voltage (Vsup) should be kept above 2.7V.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.As a result of using this lighting driver, UNDERVOLTAGE LOCKOUT can also be produced.0.07mA is the maximum operating current.
TPS2061DGNR Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2061DGNR Applications
There are a lot of Texas Instruments TPS2061DGNR Power Switches ICs applications.
- Mobile Communication Devices
- Storage Drives
- HDD, SSD
- Wireless Modem Data Cards
- Low Voltage I/O System Power
- Smartphone and PDA
- Wireless/Networking Cards
- HDD and SSD
- PC Cards
- Telecom and Network Systems