TPS2061DGNRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 1.7123W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2061 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2061DGNRG4 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package contains it.The mounting type of the LED driver is Surface Mount.The switch type of this switch is General Purpose.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.It is possible to use 1 outputs in the lighting driver.The LED driving board operates at Not Required volts.The maximum output voltage of this LED driver is N-Channel volts.It has a total of Status Flag features.It comes under the family of TPS2061.As a result, there are 8 terminations.The operation is carried out using the 8 pins.It contains 1 functions.The LED driver output is limited to 1AV.High efficiency is possible when the supply voltage is set to 3.3V.The lighting driver is mounted in the direction of Surface Mount.8 pins are connected to it in total.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.The maximum input voltage is 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.This LED driver can also produce UNDERVOLTAGE LOCKOUT.In order to operate at its maximum capacity, the supply current must not exceed 0.07mA.
TPS2061DGNRG4 Features
Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2061DGNRG4 Applications
There are a lot of Texas Instruments TPS2061DGNRG4 Power Switches ICs applications.
- Portable GPS Device
- Storage Drives
- Hot Swap
- Portable Devices
- USB Power Distribution
- HDD, SSD
- Solid State Drivers
- Low Voltage I/O System Power
- Hot-Swap Systems
- Gaming
