Parameters |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Turn On Delay Time |
3 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Supply Current-Max (Isup) |
0.07mA |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
10 ms |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) |
70m Ω |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Resistance |
70mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
UNDERVOLTAGE LOCKOUT |
Max Power Dissipation |
585.82mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2061 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
1A |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
TPS2061DR Overview
The package is in the form of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.Surface Mount is the mounting type of the LED driver.It owns General Purpose switch type.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.As a default, the output is set to 1.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts has been specified.There are Status Flag features available on the LED driving board.There is a TPS2061 family of things that it belongs to.In total, there are 8 terminations.The operation is carried out using the 8 pins.Currently, there are 1 functions associated with the lighting driver.This results in the maximum output current dropping to 1A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.8 pins are connected to it in total.70mOhm resistance is present in the lighting driver.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 available channels.This LED driving board can accept voltages up to 5.5V volts as an input.It has a 2.7V volt minimum input voltage.With this LED driver, UNDERVOLTAGE LOCKOUT can also be produced.Its maximum supply current for operation is 0.07mA.
TPS2061DR Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2061DR Applications
There are a lot of Texas Instruments TPS2061DR Power Switches ICs applications.
- USB3.1 Power Delivery
- Wearable Devices
- Storage (HDDs, SSDs)
- Portable/Handheld Devices
- Portable Video Game Players
- Various applications equipped with buttons
- Portable Devices
- USB Power Distribution
- Hot Swap
- HDD and SSD