TPS2061DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 585.82mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2061 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.0005mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2061DRG4 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.The lighting driver is equipped with 1 outputs that can be used.To operate, it needs a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.There are Status Flag features available on the LED driving board.The TPS2061 family consists of this type.A total of 8 terminations have been recorded.8 pins are used for operation.It has 1 functions.In this case, the LED driving board can produce only 1AV as its maximum output.The supply voltage of 3.3V is conducive to high efficiency.It is equipped with a total of 8 pins.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.Voltage input is limited to 5.5V volts.There is a minimum input voltage of 2.7V volts.By using this lighting driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.For operation, it can supply a maximum current of 0.0005mA.
TPS2061DRG4 Features
Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2061DRG4 Applications
There are a lot of Texas Instruments TPS2061DRG4 Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Solid State Drivers
- Set-top-box
- Telecom and Network Systems
- Portable GPS
- Storage Drives
- Portable Devices
- Smart Phones, Feature Phones
- USB3.1 Power Delivery
- Handheld Devices
