TPS2062AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2062 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2062AD Overview
Tube is how it's packaged.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.There are 2 outputs available on this lighting driver.Operation is based on Not Required supply voltage.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.It belongs to the family TPS2062.A total of 8 terminations have been recorded.In order to operate, 8 pins are used.There are 1 functions of the LED driver.1AV is the maximum output of the LED driver.As long as the supply voltage is 5V, high efficiency can be achieved.A total of 8 pins are present on it.70mOhm is the resistance of the lighting driver.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.You can select from 2 channels.This LED driver can handle voltages up to 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.A maximum supply current of 0.09mA is available for operation.
TPS2062AD Features
Supplied from 5V
Resistance of 70mOhm
2 channels
TPS2062AD Applications
There are a lot of Texas Instruments TPS2062AD Power Switches ICs applications.
- Portable GPS Device
- Wireless/Networking Cards
- Storage Drives
- USB Ports/Hubs
- Hot-Swap Systems
- Notebook PC
- PC Card Hot Swap
- Smart Phones, Feature Phones
- USB Protection
- Handheld Devices
