Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
70mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TPS2062 |
Pin Count |
8 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Max Output Current |
1A |
Number of Channels |
2 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Nominal Supply Current |
50μA |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Supply Current-Max (Isup) |
0.09mA |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:2 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) |
70m Ω |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2062ADR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~125°C TJ.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts.It has a total of Status Flag features.It is a member of the TPS2062 family.A total of 8 terminations have been found in it.The 8 pins are used for the operation of the system.As far as functions are concerned, the lighting driver has 1.In order to meet the operation criteria, the maximum output current drops to 1A.Supply voltages of 5V allow for high efficiency.The LED driving board is equipped with a total of 8 pins.70mOhm resistance is present in the lighting driver.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.In total, there are 2 channels available.The maximum input voltage is 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.Operation requires 0.09mA supply current.
TPS2062ADR Features
Supplied from 5V
Resistance of 70mOhm
2 channels
TPS2062ADR Applications
There are a lot of Texas Instruments TPS2062ADR Power Switches ICs applications.
- Notebook PC
- Low Voltage I/O System Power
- HDD, SSD
- Notebook and Tablet Computers
- Storage (HDDs, SSDs)
- Wearable Devices
- Hot Swap
- PDAs
- Wireless Headsets
- Smart Phones, Feature Phones