TPS2062ADRBTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2062 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2062ADRBTG4 Overview
The LED driver's packaged as a Tape & Reel (TR).The 8-VDFN Exposed Pad package contains it.The LED driver is mounted as Surface Mount.A General Purpose switch type is owned by it.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The lighting driver is equipped with 2 outputs that can be used.It uses a supply voltage of Not Required to operate.It has a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.I believe it belongs to the TPS2062 family.A total of 8 terminations have been recorded.The 8 pins are used for the operation of the system.Currently, there are 1 functions associated with the lighting driver.In this case, the LED driving board can produce only 1AV as its maximum output.With a supply voltage of 5V, high efficiency is possible.There are 8 pins in total on this board.Currently, the LED driving board has 70mOhm resistance.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 2 channels available.A maximum input voltage of 5.5V volts can be applied to it.It requires 2.7V volts as the minimum input voltage.Its maximum supply current for operation is 0.09mA.
TPS2062ADRBTG4 Features
Supplied from 5V
Resistance of 70mOhm
2 channels
TPS2062ADRBTG4 Applications
There are a lot of Texas Instruments TPS2062ADRBTG4 Power Switches ICs applications.
- Portable/Handheld Devices
- USB Power Distribution
- Set-top-box
- Storage Drives
- Telecom and Network Systems
- USB Protection
- Portable Music Players
- Portable GPS
- PC Card Hot Swap
- Various applications equipped with buttons
