TPS2062CDGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2062 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
TPS2062CDGN Overview
It's?packaged?in?the way?of?a?Tube.This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.It has been mounted as Surface Mount on the LED driver.A General Purpose switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.The lighting driver has a total of 2 outputs that are available for use.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It has a total of Load Discharge, Status Flag features.This object belongs to the TPS2062 family.As a result, there are 8 terminations.During operation, the 8 pins are used.It consists of 1 functions.It is possible to achieve a high level of efficiency with a supply voltage of 5V.The LED driving board is equipped with a total of 8 pins.Currently, the LED driving board has 70mOhm resistance.The output current is set to 1A in this case.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.We currently have 2 channels available.Its maximum input voltage is 5.5V volts.There is a minimum input voltage of 4.5V volts for this LED driver.
TPS2062CDGN Features
Supplied from 5V
Resistance of 70mOhm
2 channels
TPS2062CDGN Applications
There are a lot of Texas Instruments TPS2062CDGN Power Switches ICs applications.
- Portable GPS
- Portable GPS Device
- Smart Phones, Feature Phones
- Portable Music Players
- Mobile Communication Devices
- USB Protection
- Hot-Swap Systems
- USB Power Distribution
- Low Voltage I/O System Power
- Telecom and Network Systems
