TPS2062CDRBR-2

N-Channel 0.65mm PMIC TPS2062 8 Pin 8-VDFN Exposed Pad

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS2062CDRBR-2
Package: 8-VDFN Exposed Pad
Datasheet: -
Stock: 893
Description: N-Channel 0.65mm PMIC TPS2062 8 Pin 8-VDFN Exposed Pad (Kg)

Details

Tags

Parameters
Package / Case	8-VDFN Exposed Pad
Number of Pins	8
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Feature	Status Flag
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Resistance	70mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Base Part Number	TPS2062
Number of Outputs	2
Output Type	N-Channel
Max Output Current	1A
Interface	On/Off
Analog IC - Other Type	SPST
Output Configuration	High Side
Output Current	1A
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	General Purpose
Input Voltage (Max)	5.5V
Supply Current-Max (Isup)	0.001mA
Ratio - Input:Output	1:2
Voltage - Load	4.5V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Switching	MAKE-BEFORE-BREAK
Rds On (Typ)	73m Ω
Height	1mm
Length	3mm
Width	3mm
Thickness	880μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount

TPS2062CDRBR-2 Overview

It's?packaged?in?the way?of?a?Tape & Reel (TR).It's included in the 8-VDFN Exposed Pad package.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has a total of 2 outputs.The LED driving board is powered by a voltage of Not Required.The maximum output voltage is N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.It comes under the family of TPS2062.The operation is carried out using the 8 pins.To meet the operation criteria, the maximum output current drops to 1A.The lighting driver is mounted in the way of Surface Mount.70mOhm is the resistance of the lighting driver.When this case is used, the output current is set to 1A.The gadget uses an analog IC, which is SPST in this case.0.001mA is the maximum operating current.