TPS2062DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 1.7123W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2062 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2062DGN Overview
It is packaged in the form of a Tube.This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.The LED driver is mounted as Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.The LED driver has 2 outputs.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Status Flag features is available.It belongs to the TPS2062 family.There are 8 terminations in it.For operation, we use the 8 pins.Currently, there are 1 functions associated with the lighting driver.There is a maximum output of 1AV from the LED driver.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.Surface Mount is mounted in the way of this LED driving board.8 pins are equipped with it.Currently, the LED driving board has a resistance of 70mOhm ohms.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.The total number of channels is 1.Voltage input is limited to 5.5V volts.It requires 2.7V volts as the minimum input voltage.As a result of using this lighting driver, UNDERVOLTAGE LOCKOUT can also be produced.In order to operate, it requires at most 0.09mA amps of supply current.
TPS2062DGN Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2062DGN Applications
There are a lot of Texas Instruments TPS2062DGN Power Switches ICs applications.
- Hot Swap
- Wireless/Networking Cards
- PC Card Hot Swap
- Set-Top Boxes
- Notebook and Tablet Computers
- Wireless Modem Data Cards
- Smartphone and PDA
- Solid State Drivers
- HDD and SSD
- Various applications equipped with buttons
