TPS2062DGNG4
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 1.7123W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2062 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
TPS2062DGNG4 Overview
A Tube is used to package it.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package includes it.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is N-Channel volts.In terms of features, the LED driving board has Status Flag.The TPS2062 family contains this object.There are 8 terminations in it.In order to operate, the 8 pins are used.The LED driver has 1 functions.As a result, the maximum output current is reduced to 1A in order to meet the operation requirements.The supply voltage can be 3.3V for high efficiency.Surface Mount is mounted in the way.This LED driver is equipped with a total of 8 pins.Currently, the LED driving board has a resistance of 70mOhm ohms.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.This LED driving board can accept voltages up to 5.5V volts as an input.The minimum input voltage is 2.7V volts.This LED driver can also produce UNDERVOLTAGE LOCKOUT.The maximum supply current for the LED driver is 0.09mA when it is operating.
TPS2062DGNG4 Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2062DGNG4 Applications
There are a lot of Texas Instruments TPS2062DGNG4 Power Switches ICs applications.
- Storage Drives
- Telecom and Network Systems
- Gaming
- PDAs
- Set-top-box
- Hot Swap
- USB Power Distribution
- Notebook and Tablet Computers
- USB Ports/Hubs
- Hot Swaps
