banner_page

TPS2062DR-1

N-Channel PMIC TPS2062 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2062DR-1
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 423
  • Description: N-Channel PMIC TPS2062 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e4
Feature Load Discharge, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 70mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation 585.82mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number TPS2062
Pin Count 8
Number of Outputs 2
Output Type N-Channel
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Current - Output (Max) 1A
Nominal Supply Current 50μA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Input Type Non-Inverting
Turn On Delay Time 3 ms
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Turn-Off Delay Time 10 ms
Threshold Voltage 2.4
Ratio - Input:Output 1:2
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Rds On (Typ) 70m Ω
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2062DR-1 Overview


As a result, it is packaged in the form of a Tape & Reel (TR).It is included in the package 8-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.By default, it is set to output 2.In order to operate, it requires a voltage supply of Not Required.Voltage output is N-Channel volts at maximum.The lighting driver has Load Discharge, Status Flag features.It comes under the family of TPS2062.It contains 8 terminations.In order to operate, 8 pins are used.The LED driving board has a total of 1 functions.The LED driver output is limited to 1AV.A supply voltage of 3.3V leads to high efficiency.A total of 8 pins are present on it.Lighting drivers with 70mOhm resistance are used.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.The total number of channels is 1.A maximum input voltage of 5.5V volts can be applied to it.A voltage of 2.7V volts is the minimum input voltage.

TPS2062DR-1 Features


Supplied from 3.3V
Resistance of 70mOhm
1 channels

TPS2062DR-1 Applications


There are a lot of Texas Instruments TPS2062DR-1 Power Switches ICs applications.

  • Hot Swap
  • Storage Drives
  • Handheld Devices
  • Portable Devices
  • USB Power Distribution
  • Wearable Devices
  • Storage (HDDs, SSDs)
  • Mobile Communication Devices
  • Hard Disk Drives
  • Solid-State Drives

Write a review

Note: HTML is not translated!
    Bad           Good