TPS2062DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2062 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2062DR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).Package 8-SOIC (0.154, 3.90mm Width) contains it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.There is a default setting of 2 for output.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be achieved by this LED driver.There are Status Flag features available on the LED driving board.There is a TPS2062 family of things that it belongs to.A total of 8 terminations can be found in it.For operation, we use the 8 pins.It contains 1 functions.From the lighting driver, there is a maximum output of 1AV.As long as the supply voltage is 3.3V, high efficiency can be achieved.This LED driver is equipped with a total of 8 pins.Lighting drivers with 70mOhm resistance are used.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.There is a maximum input voltage of 5.5V volts.There is a minimum input voltage of 2.7V volts.Using this LED driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.Its maximum supply current for operation is 0.09mA.
TPS2062DR Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2062DR Applications
There are a lot of Texas Instruments TPS2062DR Power Switches ICs applications.
- Mobile Communication Devices
- Portable GPS Device
- USB3.1 Power Delivery
- Portable Video Game Players
- Hard Disk Drives
- Wearable Devices
- Various applications equipped with buttons
- PDAs
- Storage (HDDs, SSDs)
- Wireless Modem Data Cards
