TPS2062DRG4
| Parameters | |
|---|---|
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2062 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
TPS2062DRG4 Overview
Tape & Reel (TR) is how it's packaged.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.The mounting type of the LED driver is Surface Mount.A General Purpose switch type is owned by it.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.The LED driver has 2 outputs.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.In terms of features, the LED driving board has Status Flag.It belongs to the TPS2062 family.There are 8 terminations in it.For operation, 8 pins are used.It is important to note that the LED driving board has 1 functions.There is a maximum output of 1AV from the LED driver.The supply voltage of 3.3V is conducive to high efficiency.8 pins are equipped with it.70mOhm is the resistance of the lighting driver.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.The total number of channels is 1.This LED driving board can accept voltages up to 5.5V volts as an input.A minimum input voltage of 2.7V volts is required for this LED driver.This LED driver can also produce UNDERVOLTAGE LOCKOUT.For operation, it has a maximum supply current of 0.09mA.
TPS2062DRG4 Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2062DRG4 Applications
There are a lot of Texas Instruments TPS2062DRG4 Power Switches ICs applications.
- PDAs
- Solid-State Drives
- Portable Music Players
- Wearable Devices
- Smartphone and PDA
- PC Cards
- Wireless Modem Data Cards
- Notebook and Tablet Computers
- Set-Top Boxes
- Hot Swaps
