TPS2062QDGNRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2062 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.09mA |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2062QDGNRQ1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package contains it.The lighting driver has the mounting type Surface Mount.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TA.There are 2 outputs available on this lighting driver.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.It is part of the TPS2062 family of LED drivers.As a result, there are 8 terminations.For operation, we use the 8 pins.It contains 1 functions.1AV is the maximum output of the LED driver.Using a voltage of 3.3V allows for high efficiency.In this case, it is mounted in the way of Surface Mount.8 pins are connected to it in total.Currently, the LED driving board has a resistance of 70mOhm ohms.The Automotive, AEC-Q100 series includes this electrical component.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.In order to operate at its maximum capacity, the supply current must not exceed 0.09mA.
TPS2062QDGNRQ1 Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
TPS2062QDGNRQ1 Applications
There are a lot of Texas Instruments TPS2062QDGNRQ1 Power Switches ICs applications.
- Portable Devices
- USB3.1 Power Delivery
- Smart Phones, Feature Phones
- Hot Swaps
- Hot-Swap Systems
- USB Ports/Hubs
- Portable GPS Device
- Wearable Devices
- USB Protection
- Handheld Devices
