TPS2063D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2063 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.11mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2063D Overview
The LED driver's packaged as a Tube.There is a 16-SOIC (0.154, 3.90mm Width) package that includes it.The lighting driver has the mounting type Surface Mount.It owns General Purpose switch type.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.In this LED driver, there are no outputs available.With a supply voltage of Not Required, the LED driving board operates.A maximum voltage of N-Channel volts is available from the output of this LED driver.It has a total of Status Flag features.It belongs to the family TPS2063.A total of 16 terminations have been found in it.For operation, 16 pins are used.The LED driving board has a total of 1 functions.This LED driver has a maximum output of 1AV.With a supply voltage of 3.3V, high efficiency is possible.This LED driver is equipped with a total of 16 pins.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 1 channels to choose from.Its maximum input voltage is 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.UNDERVOLTAGE LOCKOUT can also be produced by using this LED driver.Operation requires 0.11mA supply current.
TPS2063D Features
Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2063D Applications
There are a lot of Texas Instruments TPS2063D Power Switches ICs applications.
- Set-Top Boxes
- USB Protection
- Hot Swaps
- Solid State Drivers
- Portable GPS
- USB Power Distribution
- Smart Phones, Feature Phones
- USB Ports/Hubs
- Portable GPS Device
- Various applications equipped with buttons
