TPS2063DRG4
| Parameters | |
|---|---|
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.11mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2063 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
TPS2063DRG4 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The 16-SOIC (0.154, 3.90mm Width) package contains it.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The lighting driver has a total of 3 outputs that are available for use.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of N-Channel volts.A lighting driver with Status Flag features is available.As you can see, it comes from the TPS2063 family.It has a total of 16 terminations.The operation is carried out using the 16 pins.It has 1 functions.There is a maximum output of 1AV from the LED driver.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.The LED driver has a total of 16 pins.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.There are a total of 1 available channels.This LED driving board can accept voltages up to 5.5V volts as an input.It has a 2.7V volt minimum input voltage.As well as producing UNDERVOLTAGE LOCKOUT, this LED driving board is capable of producing [1].It operates at a maximum supply current of 0.11mA.
TPS2063DRG4 Features
Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2063DRG4 Applications
There are a lot of Texas Instruments TPS2063DRG4 Power Switches ICs applications.
- Solid-State Drives
- Hot Swaps
- HDD, SSD
- Low Voltage I/O System Power
- PDAs
- Smart Phones, Feature Phones
- Telecom and Network Systems
- Wearable Devices
- Portable/Handheld Devices
- Solid State Drivers
