TPS2064DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | 0°C~105°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 1.37W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2064 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2064DGN Overview
The package is in the form of a Tube.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package includes it.The lighting driver has the mounting type Surface Mount.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to 0°C~105°C TJ.The lighting driver has a total of 2 outputs that are available for use.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.Status Flag features are available on the lighting driver.The TPS2064 family consists of this type.A total of 8 terminations can be found in it.It is necessary to use the 8 pins in order to operate the LED driver.It contains 1 functions.Supply voltages of 3.3V allow for high efficiency.As a result, it is mounted in the manner of Surface Mount.In total, it has 8 pins.70mOhm is the resistance of the lighting driver.As a result, the output current is set to 1.5A.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 2 channels.A maximum input voltage of 5.5V volts can be applied to it.Input voltage must be at least 2.7V volts.As a result of using this lighting driver, UNDERVOLTAGE LOCKOUT can also be produced.Operation requires 0.09mA supply current.
TPS2064DGN Features
Supplied from 3.3V
Resistance of 70mOhm
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2064DGN Applications
There are a lot of Texas Instruments TPS2064DGN Power Switches ICs applications.
- Portable Music Players
- USB Power Distribution
- Hot Swap
- PDAs
- USB Protection
- USB3.1 Power Delivery
- Portable GPS
- Portable GPS Device
- HDD, SSD
- Set-top-box
