TPS2064DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | 0°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2064 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2064DGNR Overview
A Tape & Reel (TR) is used to package it.This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.To ensure reliable operation, set the temperature to 0°C~105°C TJ.The LED driver has a total of 2 outputs.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts on this LED driver.There are Status Flag features available on the LED driving board.The TPS2064 family contains this object.A total of 8 terminations can be found in it.The operation is carried out using the 8 pins.As far as functions are concerned, the lighting driver has 1.To comply with the operation criteria, the maximum output current is reduced to 1.5A.With a supply voltage of 3.3V, high efficiency is possible.In this case, it is mounted in the way of Surface Mount.The LED driver has a total of 8 pins.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 2 channels.With this LED driver, UNDERVOLTAGE LOCKOUT can also be produced.It has a maximum supply current of 0.09mA.
TPS2064DGNR Features
Supplied from 3.3V
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2064DGNR Applications
There are a lot of Texas Instruments TPS2064DGNR Power Switches ICs applications.
- Wearable Devices
- Low Voltage I/O System Power
- Portable Devices
- Solid State Drivers
- USB Power Distribution
- Solid-State Drives
- Storage Drives
- Hot Swap
- USB Protection
- Hot Swaps
