Parameters |
Rds On (Typ) |
96m Ω |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Resistance |
86mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
TPS2065 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Operating Supply Voltage |
5.5V |
Interface |
On/Off |
Analog IC - Other Type |
SPST |
Output Configuration |
High Side |
Output Current |
1A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
75μA |
Input Type |
Non-Inverting |
Turn On Delay Time |
2.4 ms |
Switch Type |
USB Switch |
Min Input Voltage |
4.5V |
Max Input Voltage |
5.5V |
Turn-Off Delay Time |
3.25 ms |
Ratio - Input:Output |
1:1 |
Voltage - Load |
4.5V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
Switching |
MAKE-BEFORE-BREAK |
TPS2065CDBVR-2 Overview
It is packaged in the manner of a Tape & Reel (TR).There is a SC-74A, SOT-753 package that includes it.Surface Mount is the mounting type of the LED driver.This switch is of type USB Switch.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.The lighting driver has a total of 1 outputs that are available for use.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.Status Flag features are available on the lighting driver.The TPS2065 family contains this object.During operation, the 5 pins are used.The lighting driver is mounted in the direction of Surface Mount.The LED driver has 86mOhm resistance.When this case is used, the output current is set to 1A.There is an analog input IC in this gadget, which is SPST.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.This LED driver can handle voltages up to 5.5V volts.As a minimum input voltage, it requires 4.5V volts.There is a maximum current requirement of 75μA for its operation.
TPS2065CDBVR-2 Features
Resistance of 86mOhm
TPS2065CDBVR-2 Applications
There are a lot of Texas Instruments TPS2065CDBVR-2 Power Switches ICs applications.
- PC Card Hot Swap
- Solid-State Drives
- Mobile Communication Devices
- Wireless/Networking Cards
- Wearable Devices
- USB Power Distribution
- Portable GPS
- PC Cards
- HDD and SSD
- Portable GPS Device