TPS2065CDGNR-2

N-Channel 0.65mm PMIC TPS2065 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS2065CDGNR-2
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: -
Stock: 352
Description: N-Channel 0.65mm PMIC TPS2065 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
ECCN Code	EAR99
Resistance	86mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	TPS2065
Number of Outputs	1
Output Type	N-Channel
Max Output Current	1A
Operating Supply Voltage	5.5V
Interface	On/Off
Analog IC - Other Type	SPST
Output Configuration	High Side
Output Current	1A
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	75μA
Input Type	Non-Inverting
Turn On Delay Time	2.4 ms
Switch Type	USB Switch
Min Input Voltage	4.5V
Max Input Voltage	5.5V
Turn-Off Delay Time	3.25 ms
Ratio - Input:Output	1:1
Voltage - Load	4.5V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Switching	MAKE-BEFORE-BREAK
Rds On (Typ)	86m Ω
Height	1.1mm
Length	3mm
Width	3mm
Thickness	1.02mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	8
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Feature	Status Flag

TPS2065CDGNR-2 Overview

Tape & Reel (TR) is the way it's packaged.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package contains it.It has been mounted as Surface Mount on the LED driver.It owns USB Switch switch type.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is N-Channel volts.In terms of features, the LED driving board has Status Flag.The TPS2065 family consists of this type.It is necessary to use the 8 pins in order to operate the LED driver.This operation requires the maximum output current to be decreased to 1A.Surface Mount is mounted in the way.86mOhm is the resistance of the lighting driver.The output current is set to 1A in this case.It uses an analog IC, which is SPST.Optimal efficiency requires a voltage of 5.5V.There is a maximum input voltage of 5.5V volts.Input voltage must be at least 4.5V volts.This system has a maximum current requirement of 75μA.