banner_page

TPS2065CDGNR

N-Channel 0.65mm PMIC TPS2065 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2065CDGNR
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
  • Datasheet: -
  • Stock: 150
  • Description: N-Channel 0.65mm PMIC TPS2065 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Nominal Supply Current 1.55A
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type USB Switch
Min Input Voltage 4.5V
Max Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 4.5V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Rds On (Typ) 86m Ω
Height 1.1mm
Length 3mm
Width 3mm
Thickness 1.02mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~125°C TJ
Packaging Cut Tape (CT)
JESD-609 Code e4
Feature Load Discharge, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number TPS2065
Pin Count 8
Number of Outputs 1
Output Type N-Channel
Number of Channels 1
Interface On/Off
Analog IC - Other Type ANALOG CIRCUIT
Current - Output (Max) 1A

TPS2065CDGNR Overview


The package is in the form of a Cut Tape (CT).It is included in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.Surface Mount is the mounting type of the LED driver.The switch type of this switch is USB Switch.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.As a default, the output is set to 1.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.The lighting driver has Load Discharge, Status Flag features.It is a member of the TPS2065 family.It contains 8 terminations.In order to operate, 8 pins are used.There are 1 functions of the LED driver.In terms of output, the lighting driver can provide a maximum of 1A V.A supply voltage of 5V leads to high efficiency.In total, it has 8 pins.This gadget uses an analog IC, which is ANALOG CIRCUIT in this case.In total, 1 channels are available.There is a maximum input voltage of 5.5V volts.A minimum input voltage of 4.5V volts is required for this LED driver.

TPS2065CDGNR Features


Supplied from 5V
1 channels

TPS2065CDGNR Applications


There are a lot of Texas Instruments TPS2065CDGNR Power Switches ICs applications.

  • PC Cards
  • Hard Disk Drives
  • Smart Phones, Feature Phones
  • Wireless/Networking Cards
  • USB Power Distribution
  • Notebook PC
  • Portable/Handheld Devices
  • PDAs
  • Hot-Swap Systems
  • HDD, SSD

Write a review

Note: HTML is not translated!
    Bad           Good