TPS2065DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 585.82mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2065 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2065DG4 Overview
It is packaged in the form of a Tube.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.It is possible to use 1 outputs in the lighting driver.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts has been specified.It has a total of Status Flag features.The TPS2065 family consists of this type.A total of 8 terminations have been found in it.In order to operate, 8 pins are used.There are 1 functions of the LED driver.1AV is the maximum output of the LED driver.High efficiency is possible when the supply voltage is set to 3.3V.8 pins are equipped with it.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 1 channels available.As far as input voltage goes, its maximum is 5.5V volts.Input voltage must be at least 2.7V volts.UNDERVOLTAGE LOCKOUT can also be produced by using this LED driver.For operation, it has a maximum supply current of 0.07mA.
TPS2065DG4 Features
Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2065DG4 Applications
There are a lot of Texas Instruments TPS2065DG4 Power Switches ICs applications.
- USB Protection
- Solid-State Drives
- USB Power Distribution
- Storage (HDDs, SSDs)
- Hard Disk Drives
- Gaming
- Notebook PC
- Hot Swap
- Wireless Headsets
- Telecom and Network Systems
