TPS2065DGN-1
| Parameters | |
|---|---|
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2065 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
TPS2065DGN-1 Overview
It is package in Tube case.This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.The LED driver is equipped with 1 outputs.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage is N-Channel volts.There are Load Discharge, Status Flag features available on the LED driving board.It belongs to the TPS2065 family.The termination count is 8.During operation, the 8 pins are used.It contains 1 functions.As long as the supply voltage is 3.3V, high efficiency can be achieved.Surface Mount is mounted in the way of this LED driving board.There are 8 pins in total on this board.Normal operation requires Vsup above 2.7V.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.To choose from, there are 1 channels.It has a maximum supply current of 0.07mA.
TPS2065DGN-1 Features
Supplied from 3.3V
1 channels
TPS2065DGN-1 Applications
There are a lot of Texas Instruments TPS2065DGN-1 Power Switches ICs applications.
- HDD, SSD
- Hot Swaps
- Portable Music Players
- Storage (HDDs, SSDs)
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Solid-State Drives
- Hot Swap
- Wearable Devices
- Notebook PC
