TPS2065DGNR-1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2065 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Threshold Voltage | 2.4 |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2065DGNR-1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package that includes it.Surface Mount is the mounting type of the LED driver.The switch type of this switch is General Purpose.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.The LED driver has 1 outputs.Operation is based on Not Required supply voltage.A maximum voltage of N-Channel volts is available from the output of this LED driver.As far as features are concerned, the LED driving board has Load Discharge, Status Flag.This object belongs to the TPS2065 family.A total of 8 terminations can be found in it.It is necessary to use the 8 pins in order to operate the LED driver.Currently, the lighting driver has a total of 1 functions.The maximum output of the LED driving board is 1AV.Supply voltages of 3.3V allow for high efficiency.Surface Mount is mounted in the way.The LED driving board is equipped with a total of 8 pins.The supply voltage (Vsup) should be kept above 2.7V for normal operation.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.You can select from 1 channels.
TPS2065DGNR-1 Features
Supplied from 3.3V
1 channels
TPS2065DGNR-1 Applications
There are a lot of Texas Instruments TPS2065DGNR-1 Power Switches ICs applications.
- Wireless Modem Data Cards
- Low Voltage I/O System Power
- PDAs
- PC Cards
- Wireless Headsets
- Solid State Drivers
- Portable Music Players
- Hot Swaps
- Hard Disk Drives
- Storage (HDDs, SSDs)
