TPS2065DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 1.7123W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2065 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2065DGNR Overview
Tape & Reel (TR) is the way it's packaged.It is included in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.There are 1 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Status Flag features are available on the lighting driver.It is a member of the TPS2065 family.It contains 8 terminations.For operation, 8 pins are used.The LED driver has 1 functions.The maximum output of the LED driving board is 1AV.A supply voltage of 3.3V leads to high efficiency.Surface Mount is mounted in the way of this lighting driver.8 pins are connected to it in total.In this case, there is 70mOhm resistance in the LED driving board.Normal operation requires Vsup above 2.7V.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.A total of 1 channels are available for you to choose from.By using this lighting driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.In order to operate, it requires at most 0.07mA amps of supply current.
TPS2065DGNR Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2065DGNR Applications
There are a lot of Texas Instruments TPS2065DGNR Power Switches ICs applications.
- Portable GPS Device
- Low Voltage I/O System Power
- Handheld Devices
- Gaming
- Portable GPS
- Wearable Devices
- Notebook and Tablet Computers
- Wireless/Networking Cards
- Mobile Communication Devices
- Portable/Handheld Devices
