TPS2065QDGNRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2065 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.07mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2065QDGNRQ1 Overview
It is packaged in the manner of a Tape & Reel (TR).It is included in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TA.The lighting driver has a total of 1 outputs that are available for use.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It is equipped with Status Flag features.I believe it belongs to the TPS2065 family.In total, there are 8 terminations.The 8 pins are used for the operation of the system.It contains 1 functions.It is necessary to reduce the maximum output current to 1A to meet the operation criteria.A supply voltage of 3.3V leads to high efficiency.Surface Mount is mounted in the way of this lighting driver.It is equipped with a total of 8 pins.This electrical component can be found in the Automotive, AEC-Q100 series.The maximum supply voltage for this LED driver is 5.5V (Vsup).Normal operation requires a voltage above 2.7V for the supply voltage.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 1 available channels.Operation requires 0.07mA supply current.
TPS2065QDGNRQ1 Features
Supplied from 3.3V
1 channels
TPS2065QDGNRQ1 Applications
There are a lot of Texas Instruments TPS2065QDGNRQ1 Power Switches ICs applications.
- USB3.1 Power Delivery
- Hot Swap
- Hot Swaps
- Solid State Drivers
- Telecom and Network Systems
- Wireless/Networking Cards
- Hot-Swap Systems
- Portable/Handheld Devices
- Portable GPS Device
- Wireless Modem Data Cards
